Chloro-sulfonated polyethylene anti-corrosion coat

Product composition:

Chloro-sulfonated polyethylene anticorrosive coating is a kind of vinyl chloride rubber as base material, adding modified resin, pigment, filler, additive, organic solvent, curing

Agent, etc., divided into a, b and b package.

Product features:

Chloro-sulfonated polyethylene anticorrosive coating has good chemical resistance, salt spray, acid alkali salt corrosion, ozone resistance, weather aging, water resistance and cold resistance

Etc., the film is flexible, good wear resistance and easy to construct.

Product use:

Chloro-sulfonated polyethylene anticorrosion coating is suitable for the steel structure equipment pipeline, tower, concrete wall and other equipment and facilities that are corroded by chemical atmosphere.

The internal and external wall of acid base salt storage tank, urea, ammonium nitrate granule tower inside and outside wall, workshop, wall floor of storage wall and various chemical media corrosion equipment, etc.; Used for water

Reservoir, cooling tower, sewage tank, water sluice, reservoir swimming pool, etc. Buildings, equipment, tank surfaces and losses for oil exploitation and fire systems

Oil pipeline, oil tank, etc.

Instructions:

Coating method: brush, roll, spray

Precoat: J53-81 chlorosulfonated polyethylene primer, J53 chlorosulfonated polyethylene intermediate coat

Coating intervals: 23 + 2 ℃, the shortest: 2 hours, the longest: one month

Technical indicators:

Appearance: colors

Diluent: special diluent of X-1 chlorosulfonated polyethylene coating

Flash: 1:10 ℃; B: 16 ℃

Ratio: a: b = 10:1 (weight ratio); Aluminium silver: a: b: c = 10:1:0.9-1.1 (weight ratio)

Shelf life: 23 + 2 ℃ : 12 hours

Density: about 0.95 ~ 1.05

Ripening stage: mixing can be used

Drying time: 23 + 2 ℃ : table dry: 0.5 hours, work: 24 hours, fully cure: 7 days

Dry film thickness: 20 ~ 25 micron

Theoretical dosage: 120 ~ 130 g/m2

Packing specifications:

Iron bucket a 20kg; The hydrated points 4 kg

Storage method:

Storage: must be stored in accordance with state regulations. The storage environment should be dry, cool, well ventilated, avoid high temperature and stay away from fire source. The packing container must be sealed.

Storage period: 6 months. After that, it should be checked and used.

Notes:

If the paint is splashed into your eyes, rinse immediately with water and ask for medical treatment. Apply soap and water to wash or use the appropriate industry if the skin is stained with paint

Cleaning agent, it is best not to use a lot of solvent or thinner.

Safety: please pay attention to the safety items on the packing label. In addition, safety regulations set by relevant state or local governments should also be observed. Avoid prolonged inhalation of solvents

Steam or paint fog, the skin, eyes are not allowed to contact this product, in the narrow place or the air is not in the general construction, must provide strong ventilation, should wear good protection during construction

.

Note: this indicates that the data is obtained in the laboratory, which may vary slightly due to environmental conditions. The above data is subject to change

The latest specifications of our company are subject to change without prior notice.