FRP-950X High Concentration Flame Retardant Masterbatch

  Product Detail  

I. Introduction
FRP-950X series is a flame retardant masterbatch with ultra-high red phosphorus content, mainly consisting of microencapsulated red phosphorus. Because of the high red phosphorus content, the additive volume in the plastic product is extremely small. Only 3%-5% flame retardant is added in the polymer composite material, the flame retardance can be up to UL94-V0 (T2.0mm).  

II. Product Technical Data Sheet

Note: The specific additive amount, combined with the flame retardant requirements and formulations, add 1% ~ 1.5%, can also improve the flame retardant properties.

III. Product Feature

1. High efficiency

Because of the high content of red phosphorus, low dosage adding will achieve high flame retardancy. For example, adding 3%-5% FRP-950X to PE, the flame retardancy will be V-0 at 2.0mm according to UL-94.

1. Excellent mechanical property

Due to the low dosage needed to achieve UL-94 V0 grade (approx. 4.8-7.2% by weight as pure red phosphorus), they show low impact on mechanical properties.

1. New carrier

We use a new type compatilizer as the carrier for microencapsulated red phosphorus, this is our exclusive technology in China.

1. Extra small powder.

The average red phosphorus grain size is about 2500 mesh at D50.

1. Ecological friendly: Non-halogen, reach RoHS and REACH requirement.
2. Low moisture absorption.
3. Easy handling.
4. Very low migration and glooming.
5. Can be used for printed circuit board.

IV. Package Storage & Transportation
1. Metal drum with inner PE bag, 18kg/drum.

2. Storage in cool dry place.

3. Transport as non-dangerous chemical product.

V. Application

It can be widely used for PE, HIPS, EPS, PPO, TPE, etc, especially suitable for wire and cable.

Examples

Note: Addition in the table is suggested. The suitable addition should be checked by test.

S moke Density Test Result  in PE :