1,2-Dibromo-3-chloropropane
-
1,2-Dibromo-3-chloropropane
structure -
-
CAS No:
96-12-8
-
Formula:
C3H5Br2Cl
-
Chemical Name:
1,2-Dibromo-3-chloropropane
-
Synonyms:
OS 1897(R);NEMAFU;NEMAFUME(R);NEMAGON(R);3-CHLOROPROPYLENE BROMIDE;3-CHLORO-1,2-DIBROMOPROPANE;sd1897;2,3-DIBROMO-1-CHLOROPROPANE
- Categories:
-
CAS No:
Description
colourless to slightly yellow liquid
DBCP is an amber to brown liquid (a solidbelow 6℃/43°F) with a strong, pungent odor. It has an odorand taste threshold at 0.01 mg/L in water. Molecularweight = 236.35; Specific gravity (H2O:1): 2.1; Boilingpoint = 196℃ (decomposes); Freezing/Meltingpoint = 6.1℃; Vapor pressure 5=0.8 mmHg at 20℃; Flashpoint = 77℃. Hazard Identification (based on NFPA-704 MRating System): Health 2, Flammability 2, Reactivity 0.Slightly soluble in water; solubility = 0.1%.
ChEBI: 1,2-Dibromo-3-chloropropane is an organochlorine compound.
A colorless liquid. Denser than water. Flash point 170°F. Boiling point 195°F. Toxic by ingestion and inhalation. Used as a pesticide and fumigant.
Confirmed human carcinogen with experimental carcinogenic and teratogenic data. Poison by ingestion, inhalation, and subcutaneous routes. Moderately toxic by skin contact. An eye and severe skin irritant. Narcotic in high concentrations. Has been implicated in causing human sterihty in male factory workers. Human mutation data reported. A soil fumigant. Combustible. When heated to decomposition it emits toxic fumes of Cl and Br-. See also CHLORIDES and BROLVIDES.
1,2-Dibromo-3-chloropropane Basic Attributes
236.33
236.33
1732077
202-479-3
TSCA listed
Colorless to Light yellow
2903793090
Characteristics
0
Colorless when pure, however, technical grades are yellowish to dark brown. Pungent odor at high concentrations
2.96
Dense Liquid
2.05
6°C
195°C
77 °C
n/D 1.5542
0.123 g/100 mL
Refrigerator
0.8 at 21 °C (quoted, Verschueren, 1983)
Relative vapour density (air = 1): 8.16
DBCP in soil can volatilize from near-surface soil. Based on estimated Koc values of 149 in Lincoln fine sand and 128 in an unspecified soil, DBCP will be highly mobile in soil and has the capacity to leach into groundwater. It is estimated that the volatilization half-life for this chemical will vary between 0.6 days in dry soil with low soil organic content and 26.2 days in a wet soil containing high values of soil organic content. It is important to notice that fields treated with DBCP will present a significant retardation in the volatilization loss from the soil if plastic coverings are used.DBCP will exist primarily in the vapor phase in the ambient atmosphere. It is expected that very small amounts of this chemical will be present in the particulate phase, and this could explain the fact that dry deposition to the earth’s surface will not result in a significant removal process. DBCP presents high water solubility, and then small amounts present in the air can be removed by wet deposition.If found in water, DBCP will volatilize quite rapidly to the atmosphere; the estimated volatilization half-life from a pond is 8 days. Using again the estimated Koc values of 128–149, this chemical is not expected to adsorb significantly to sediment and suspended organic matter. Based on an estimated bioconcentration factor (BCF) of 11.2, it is not expected to bioconcentrate in fish and other aquatic organisms. There is no sufficient data to indicate that DBCP could be a potential risk in terms of biomagnifications in different aquatic or terrestrial food chains. However, some biodegradation of DBCP in groundwater might ensue under anaerobic conditions.
Combustion produces toxic chloride and bromide gases
2.49 x 10-4atmm3/mol at 20 °C (approximate - calculated from water solubility and vapor pressure)
Flammable. Soluble in water. Hydrolyzed in alkali.
1,2-Dibromo-3-chloropropane reacts with chemically active metals such as aluminum, magnesium, tin and their alloys. 1,2-Dibromo-3-chloropropane will attack some rubber materials and coatings.
Refrigerator
Safety Information
III
6.1(b)
2872
3
T,F
53-45-61-36/37-16-7
TX8750000
T,F
Color Code—Blue: Health Hazard/Poison: Storein a secure poison location. Prior to working with DBCPyou should be trained on its proper handling and storage.Store in a refrigerator. Protect from alkalis and reactivemetals. Protection from light is recommended for long-termstorage. Where possible, automatically pump liquid fromdrums or other storage containers to process containers. Aregulated, marked area should be established where thischemical is handled, used, or stored in compliance withOSHA Standard 1910.1045.
Toxic
Stable. Flammable. Incompatible with strong oxidizing agents, chemically active metals and their alloys. May attack some rubber-based materials.
P201-P210-P260-P280-P301 + P310 + P330-P308 + P311-P403 + P233
45-46-60-25-48/20/22-52/53-39/23/24/25-23/24/25-11
Reacts with oxidizers and chemicallyactive metals (i.e., aluminum, magnesium, and tin alloys).Attacks some rubber materials and coatings. Corrosive tometals.
UN 2872 6.1/PG II/III (DIBROMOCHLOROPROPANES)
Some of these materials may burn, but none ignite readily. Containers may explode when heated.
BBC 12®; FUMAGONE®; FUMAZONE®[C]; MEMATOCIDE®; NEMABROM®; NEMAFUM®; NEMAGON®[C]; NEMAGON SOIL FUMIGANT®[C]; NEMANAX®; NEMAPAZ®; NEMASET®; NEMATOCIDE®[C]; NEMATOX®; NEMAZON®; OS 1897®; OXY BCP®[C]; SD 1897®
Toxicity
highly toxic
Biological.Biodegradation is not expected to be significant in removing 1,2-dibromo- 3-chloropropane. In aerobic soil columns, no degradation was observed after 25 days (Wilson et al., 1981a).Soil.Soil water cultures converted 1,2-dibromo-3-chloropropane to n-propanol, bromide and chloride ions. Precursors to the alcohol formation include allyl chloride and allyl alcohol (Castro and Belser, 1968). The reported half-life in soil is 6 months (Jury et al., 1987).Groundwater.According to the U.S. EPA (1986) 1,2-dibromo-3-chloropropane has a high potential to leach to groundwater.Chemical/Physical.1,2-Dibromo-3-chloropropane is subject to both neutral and basemediate hydrolysis (Kollig, 1993). Under neutral conditions, the chlorine or bromine atoms may be displaced by hydroxyl ions. If nucleophilic attack occurs at the carbon-chlorine bond, 2,3-dibromopropanol is formed which reacts further to give 2,3-dihydroxybromopropane via the intermediate epibromohydrin. 2,3-Dihydroxybromopropane will undergo hydrolysis via the intermediate 1-hydroxy-2,3-propylene oxide which further reacts with water to give glycerol. If the nucleophilic attack occurs at the carbon-bromine bond, 2- bromo-3-chloropropanol is formed which further reacts forming the end product glycerol (Kollig, 1993). If hydrolysis of 1,2-dibromo-2-chloropropane occurs under basic conditions, the compound will undergo dehydrohalogenation to form 2-bromo-3-chloropropene and 2,3-dibromo-1-propene as intermediates. Both compounds are subject to further attack forming 2-bromo-3-hydroxypropene as the end product (Burlinson et al., 1982; Kollig, 1993). The hydrolysis half-life at pH 7 and 25°C was calculated to be 38 years (Burlinson et al., 1982; Ellington et al., 1986).Emits toxic chloride and bromide fumes when heated to decomposition (Lewis, 1990).
OSHA PEL: TWA 1 ppb.
Drug Information
Inhalation of vapors or dust is extremely irritating. May cause burning of eyes and flow of tears. May cause coughing, difficult breathing and nausea. Brief exposure effects last only a few minutes. Exposure in an enclosed area may be very harmful. Fire will produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may cause pollution.
1,2-Dibromo-3-chloropropane Use and Manufacturing
It is added from 3-chloropropene and bromine at normal pressure at 10-25°C, and the reaction product is purified by distillation under reduced pressure. The original drug is added to emulsifier and xylene, and emulsified at 55-60°C for half an hour to make an 80% emulsion. Raw material consumption quota: 3-chloropropene (92%) 310kg/t, liquid bromine 600kg/t, emulsifier 100kg/t, xylene 40kg/t.
Soil fumigant; nematocide; intermediate in organic synthesis.
Formerly as an agricultural nematocide (use banned in the US in 1977)
DBCP is produced by liquid phase addition of bromine to allyl chloride. It was first produced commercially in the United States in 1955.
Nematicide, Fumigant: DBCP has been used in agriculture as a nematicide since 1955, being supplied for such use in the forms of liquid concentrate, emulsifiable concentrate, powder, granules, and solid material. A rebuttable presumption against registration for pesticide uses was issued by U.S. EPA on September 22, 1977, on the basis of oncogenicity and reproductive effects. Then, as of November 3, 1977, EPA in a further action suspended all registrations of end-use products, subject to various specific restrictions. Not listed as registered in EU countries.
Computed Properties
Molecular Weight:236.33
XLogP3:2.4
Rotatable Bond Count:2
Exact Mass:235.84260
Monoisotopic Mass:233.84465
Heavy Atom Count:6
Complexity:32
Undefined Atom Stereocenter Count:1
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes
Recommended Suppliers of 1,2-Dibromo-3-chloropropane
-
CN
5 YRS
Business licensedTrader Supplier of Intermediates,Building blocks,API,Silicones,Peptides,Lab chemicals,Biochemicals,Pharmaceuticals,Screening Compounds,Food Additives
Latest News on 1,2-Dibromo-3-chloropropane
- Product registration situation and future trend of Lime sulfur in China
- Bayer Australia is officially certified and 60 products are produced locally
- China agrochemical industry weekly(0517)
- With ADEPIDYN® technology, Syngenta cements its leading position in microbicides
- IHARA plans to launch seven new solutions in Brazil by 2024
Learn More Other Chemicals
-
Palmitoleyl alcohol
10378-01-5
-
1-Butene
106-98-9
-
Ethaboxam
162650-77-3
-
2234-56-2 Formula
2234-56-2
-
Carpropamid Formula
104030-54-8
-
Methyl isothiocyanate Formula
556-61-6
-
Flusilazole Structure
85509-19-9
-
Benalaxyl Structure
71626-11-4
-
What is Quinoxyfen
124495-18-7
-
What is Cymoxanil
57966-95-7