Troxerutin
-
Troxerutin
structure -
-
CAS No:
7085-55-4
-
Formula:
C33H42O19
-
Chemical Name:
Troxerutin
-
Synonyms:
4H-1-Benzopyran-4-one,2-[3,4-bis(2-hydroxyethoxy)phenyl]-3-[[6-O-(6-deoxy-α-L-mannopyranosyl)-β-D-glucopyranosyl]oxy]-5-hydroxy-7-(2-hydroxyethoxy)-;Flavone,3,5-dihydroxy-3′,4′,7-tris(2-hydroxyethoxy)-,3-[6-O-(6-deoxy-α-L-mannopyranosyl)-β-D-glucopyranoside];2-[3,4-Bis(2-hydroxyethoxy)phenyl]-3-[[6-O-(6-deoxy-α-L-mannopyranosyl)-β-D-glucopyranosyl]oxy]-5-hydroxy-7-(2-hydroxyethoxy)-4H-1-benzopyran-4-one;3′,4′,7-Tris(hydroxyethyl)rutin;Troxerutin;Vitamin P4;Z 6000;3,5-Dihydroxy-3′,4′,7-tris(2-hydroxyethoxy)flavone 3-rutinoside;3′,4′,7-Tri-O-(β-hydroxyethyl)rutoside;Tris(hydroxyethyl)rutoside;Venoruton P4;Tris-O-(β-hydroxyethyl)rutoside;Factor P-Zyma;Rufen-P4;Tris(hydroxyethyl)rutin;Tris-O-(2-hydroxyethyl)rutin;TriHER;Troxerutine;Ruven;Vastribil;THR;Trioxyethylrutin;Veinamitol;Veniten;Posorutin;Troxevazin;12041-99-5;27321-15-9;29702-52-1;37396-63-7;68244-17-7;96304-71-1;288306-51-4;1260230-02-1
- Categories:
-
CAS No:
Description
Troxerutin, also known as vitamin P4, is a tri-hydroxyethylated derivative of natural bioflavonoid rutins which can inhibit the production of reactive oxygen species (ROS) and depress ER stress-mediated NOD activation.
Characteristics
297.12000
-2.4
Solid
1.65 g/cm3
181 °C
1058.4ºC at 760 mmHg
332ºC
1.689
Keep tightly closed.
Safety Information
NONH for all modes of transport
3
S22-S24/25
LK8331500
Stable at normal temperatures and pressures.
P264, P270, P301+P312, P330, P501
H302
|Warning|H302 (100%): Harmful if swallowed [Warning Acute toxicity, oral]|P264, P270, P301+P312, P330, and P501|Aggregated GHS information provided by 88 companies from 3 notifications to the ECHA C&L Inventory.
Troxerutin Use and Manufacturing
Weighing 30.53g (0.05 µM) Rutin, 2.42g (15mmol) catalyst natural alkaline high molecular compound chitosan, 100 ml methanol solvent and 15.4g (0.35 µM) ethylene oxide add to the sucking stirring in the autoclave, open the digital controller, the set temperature is 75 °C, the rotating speed of 1000r/min, stirring and heating to 75 °C, thermal insulation reaction 3h. After the reaction, the temperature rapidly in cold water, and the cessation of the stirring, the closing of the digital controller, open the reaction kettle, pouring the reaction solution. Pouring the reaction solution of hydrochloric acid for adjusting the pH 6, and filtering the catalyst, the reaction solution after filtering in a seed crystal standing crystallization, the obtained crystal 35.65g, yield 96percent, external standard content of 90.1percent.Take 200 g of rutin obtained in (1) and 10.0 g Natural polymer sodium alginate added to 400 g of anhydrous methanol, and then pass 100 g of ethylene oxide, sealed autoclave, heating and stirring began, heated to 70 ° C, incubated for 4.0 h, HPLC test Trihydroxyethyl rutin When the ratio reached 86percent, the reaction was quenched rapidly to terminate the reaction. Hydrochloric acid was added to adjust the pH value of the reaction solution to 6.0. After standing for crystallization for 12 h, the mixture was suction filtered and dried to obtain 198.4 g of solid with a yield of 99.2percent. 3) to190 g of the solid obtained in (2) was added to 3200 mL of a mixed solution of anhydrous methanol and ethanol (anhydrous methanol and BThe volume ratio of alcohol is 1 : 1), heated to reflux completely dissolved, add needle activated carbon 8.0 g, continue to reflow 0.5 h, while Hot filtration, The filtrate was allowed to stand at room temperature crystallization 12h after, Suction filtration, drying The product 166.4 g, yield 87.6percent, total yield 83.2percent, content 98.7percent.(2) Taking (1) obtained in the 145 g Rutin and 7.2 g 3 on behalf of the PAMAM dendritic polymer are added to the 580 g without water in methanol, then access 58 g ethylene oxide, sealing the high-pressure autoclave, the beginning of the heating and stirring, heated to 80 °C after, thermal insulation reaction 5.0 h, HPLC detection synthetizing Rutin proportion up to 86percent when, rapid cooling, the termination of the reaction, for adjusting the pH value of the reaction solution of hydrochloric acid for the 5.0, standing crystallization 12 h after, filtered, and dried to obtain a crystal 133 g, yield 91.7percent;(3) To the (2) obtained in the crystal 133 g by adding 2.5 L water-free methanol, heating to reflux to totally dissolve, adding active carbon 4.0 g, continue to reflux 1.0 h after, to take advantage of the heat filter, the filtrate is reduced to the room temperature is static devitrifying 12 h after, filtering, drying to obtain the product troxerutin 108 g, yield 81.2percent, total yield of 74.5percent, content 99.2percent.2. Within a 5, 000 ml autoclave, 510 g (0.71 mol) 7-monohydroxyethyl rutoside, 10 ml pyridine, 1, 600 ml methanol, 400 ml methanol and 154 g (3.5 mol) ethylene oxide as the last are added. Once the addition is finished, the autoclave is sealed immediately and heated to and kept at 75-80° C. under stirring followed by a reaction for 2-3 h. When the temperature is lower than 40° C. and the pressure is released, the reaction solution is filtered. The filtrate is respectively passed through the cation exchange resin 732 column and the anion exchange resin 717 column. The pH value of the solution is adjusted to 5.0±0.2 by using 5N HCl. The filtrate is let stand for 6-8 h at room temperature. Crystal is obtained after filtration and 420 g of solid cake is obtained. 3. The solid cake obtained from 2 above is re-dissolved in a 20-fold amount of methanol-ethanol (95:5) and heated to dissolve. The solution is heated at reflux for 30 min and filtrated. The filtrate is let stand for 6-8 h at room temperature. Crystal is obtained after filtration followed by a vacuum drying at 40-50° C. The 336 g of solid powder is obtained. The content of trihydroxyethyl rutoside is 98.2percent. The melting point is 184-186° C. The yield is 64percent.The reaction solvent water was dried at room temperature at 2000 kgInto the reaction tank, Then put rutin 610kg, Under nitrogen protection, the catalyst potassium hydroxide solution (containing 79 kg of potassium hydroxide)And then slowly added under the liquid surface249 kg of chloroethanol, Heating up to 68 ° C, Constant temperature reaction 4 hours and then add potassium hydroxide solution (containing potassium hydroxide 42kg), The reaction was continued for 20 hours after sampling, After the reaction was complete, Ice bath to 18 ° C, Under nitrogen protection, hydrochloric acid adjusts the pH to 6.The resulting solution was distilled under reduced pressure to dryness, and 4 times the weight of the obtained solidified methanol was stirred and heated to 75 ° C for 45 minutes. The crystals were cooled to 24 ° C for 12 hours and centrifuged to obtain 3 ', 4', 7 ' Trihydroxyethyl rutin crude, the resulting mother liquor into the distillation tank distillation, after passing the test apply. 3 ', 4', 7 'trihydroxyethyl rutin crude and ethyl acetate in the mass ratio of 1: 4 into the reaction tank, add activated carbon heated to 82 ° C, reflux 1 hour after the stop, the thermal filtration of the mother liquor cooling To 20 ° C for 10 hours, And then centrifugal rejection filter, Drying to produce 3 ', 4', 7-trihydroxyethyl rutin yield of 90percent, content of 91percent.
1. Vasoprotectant
2. Used in the treatment of venous disorders
Cosmetics -> Skin conditioning
Computed Properties
Molecular Weight:742.7
XLogP3:-2.4
Hydrogen Bond Donor Count:10
Hydrogen Bond Acceptor Count:19
Rotatable Bond Count:15
Exact Mass:742.23202911
Monoisotopic Mass:742.23202911
Topological Polar Surface Area:293
Heavy Atom Count:52
Complexity:1170
Undefined Atom Stereocenter Count:10
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes
Drug Function and Efficacy
Inhibit platelet aggregation and prevent thrombosis; counteract vascular damage caused by serotonin and bradykinin, increase capillary resistance, reduce capillary permeability, and prevent edema caused by increased vascular permeability.
Registered Holders
-
Shanghai Modern Hasen (Shangqiu) Pharmaceutical Co., Ltd.
Active
China
-
Shaanxi Huifeng Pharmaceutical Ltd.
Active
China
-
Yantai Luyin Pharmaceutical Co., Ltd.
Active
China
Recommended Suppliers of Troxerutin
-
CN
8 YRS
Business licensed Certified factoryManufactory Supplier of Biochemicals Ingredients,Vitamin Amino Acid Ingredients,Cosmestic Ingredients,Pharma Chemicals,Organic Fine Chemicals,Food Nutrient Ingredients,Natural Plant Ingredients,APIS Intermidiates,Daily Chemicals,Agricultural Chemicals,Surfactant Chemicals,Ultraviolet Absorbents,Antioxidant Ingredients,Scientific Research Chemical,Flavors and Fragrances ChemicalsInquiryCAS No.: 7085-55-4Grade: Food GradeContent: 99% -
CN
3 YRS
Business licensedTrader Supplier of vitaminInquiryCAS No.: 7085-55-4Grade: Food gradeContent: 99% -
CN
6 YRS
Business licensed Certified factoryManufactory Supplier of Synephrine,Mucuna Pruriens extract,Maca extract,Pomegranate peel extract,Resveratrol,Epimedium leaf extract,Green tea extract,Citrus bioflavonoids,Berberine hydrochloride,hesperidin -
CN
5 YRS
Business licensed Certified factoryManufactory Supplier of Herb Extracts,Cosmetic raw materails,API -
CN
5 YRS
Business licensed Certified factoryManufactory Supplier of Calcium polystyrene sulfonate,Megestrol Acetate,Eperisone Hydrochloride
Learn More Other Chemicals
-
Elastins, cartilage, hydrolyzates
100085-10-7
-
Peptones
73049-73-7
-
Hydrolyzed vegetable protein
100209-45-8
-
Micro-Green Formula
10024-66-5
-
Strontium dichloride hexahydrate Formula
10025-70-4
-
2,5-Pyridinedicarboxylic acid Formula
100-26-5
-
N-Acetyl-α-D-glucosamine Structure
10036-64-3
-
Ceramides Structure
100403-19-8
-
What is 1-Methylnicotinamide chloride
1005-24-9
-
What is Noreugenin
1013-69-0