Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Hexahydro[1,4]dioxino[2,3-b]-1,4-dioxin-2,3,6,7-tetrol

Hexahydro[1,4]dioxino[2,3-b]-1,4-dioxin-2,3,6,7-tetrol

Hexahydro[1,4]dioxino[2,3-b]-1,4-dioxin-2,3,6,7-tetrol structure

Hexahydro[1,4]dioxino[2,3-b]-1,4-dioxin-2,3,6,7-tetrol 

structure
  • CAS No:

    4405-13-4

  • Formula:

    C6H10O8

  • Chemical Name:

    Hexahydro[1,4]dioxino[2,3-b]-1,4-dioxin-2,3,6,7-tetrol

  • Synonyms:

    [1,4]Dioxino[2,3-b]-1,4-dioxin-2,3,6,7-tetrol,hexahydro-;p-Dioxino[2,3-b]-p-dioxin-2,3,6,7-tetrol,hexahydro-;Hexahydro[1,4]dioxino[2,3-b]-1,4-dioxin-2,3,6,7-tetrol;Ethanedial,trimer,dihydrate;Glyoxal trimer dihydrate;2,3,4a,6,7,8a-Hexahydro-[1,4]dioxino[2,3-b][1,4]dioxine-2,3,6,7-tetrol;42439-84-9

  • Categories:

    Pharmaceutical Intermediates  >  Bulk Drug Intermediates

Description

PHYSICAL DESCRIPTION: White powder. (NTP, 1992)


Glyoxal trimeric dihydrate is a white powder. (NTP, 1992)


Glyoxal trimeric dihydrate is a white powder. (NTP, 1992)

Hexahydro[1,4]dioxino[2,3-b]-1,4-dioxin-2,3,6,7-tetrol Basic Attributes

210.13900

210.14

224-551-3

R6GJS0F9NZ

DTXSID6031382

2932999099

Characteristics

117.84000

-2.6

Glyoxal trimeric dihydrate is a white powder. (NTP, 1992)

1.901g/cm3

453.172ºC at 760 mmHg

227.87ºC

1.614

less than 1 mg/mL at 70° F (NTP, 1992)

Insoluble in water.

Alcohols and Polyols

GLYOXAL TRIMERIC DIHYDRATE can react with both oxidizing agents and reducing agents (such as aluminum or lithium aluminum hydride). May be incompatible with strong acids and with strong bases. May form peroxides on exposure to air and light. May attack some plastics, rubber and coatings (NTP, 1992). When ethylene glycol dimethyl ether, a glycol ether, was poured into a funnel previously used to transfer lithium aluminum hydride, a fire ignited the funnel [MCA Case History 1182, 1966].

Safety Information

NONH for all modes of transport

3

36/37/38

26-36

JH5380000

Xi

P261-P305 + P351 + P338

H315-H319-H335

Flash point data for this chemical are not available. It is probably combustible. (NTP, 1992)

|Warning|H315 (100%): Causes skin irritation [Warning Skin corrosion/irritation]|P261, P264, P271, P280, P302+P352, P304+P340, P305+P351+P338, P312, P321, P332+P313, P337+P313, P362, P403+P233, P405, and P501|Aggregated GHS information provided by 40 companies from 3 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. A water spray may also be used. (NTP, 1992)

SMALL SPILLS AND LEAKAGE: If you spill this chemical, FIRST REMOVE ALL SOURCES OF IGNITION. Then, use absorbent paper to pick up all liquid spill material. Your contaminated clothing and absorbent paper should be sealed in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with 60-70% ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should store this material under ambient temperatures. (NTP, 1992)

RECOMMENDED RESPIRATOR: Where the neat test chemical is stored, weighed and diluted, wear an approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)

Drug Information

ACUTE/CHRONIC HAZARDS: This compound may be harmful by inhalation, ingestion or skin absorption. It is irritating to the mucous membranes and upper respiratory tract. When heated to decomposition it emits toxic fumes of carbon monoxide and carbon dioxide. (NTP, 1992)

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)

Computed Properties

Molecular Weight:210.14
XLogP3:-2.6
Hydrogen Bond Donor Count:4
Hydrogen Bond Acceptor Count:8
Exact Mass:210.03756727
Monoisotopic Mass:210.03756727
Topological Polar Surface Area:118
Heavy Atom Count:14
Complexity:168
Undefined Atom Stereocenter Count:4
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Scan the QR Code to Share

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.