How to break through the market segment of materials and equipment?

With the rapid growth of China's industrial output value and demand for industrial products, as well as the transfer of the production and consumption center of the global adhesive industry to China, China's adhesive industry has achieved sustained growth in production and sales. With the promotion of industrial structure upgrading, the market demand for adhesives will increase and the application will be more and more extensive. According to the 2017-2022 China electronic adhesive industry market demand and investment advisory report, it is estimated that the market scale of China electronic adhesive in 2019 should have exceeded 10 billion yuan of coating online coatingol.com. How to optimize the adhesive materials and processes, and make full use of the characteristics of the materials, is particularly important for the realization of green and efficient bonding of the products. The adhesive and intelligent dispensing technology has become one of the fastest growing industries in recent years. Due to the concept of protecting the environment and cherishing resources, more and more attention will be paid to the environment-friendly characteristics of adhesives, such as high solid content, solvent-free, water-based, light curing, etc. high-performance environmental friendly adhesives will become the market Field new favorite, environmental protection energy-saving products (solvent-free, high solid content, water-based, light curing, low-temperature curing, hot-melt and hot-melt pressure-sensitive adhesive) will become the mainstream. For example, Dow Chemical Dow award-winning dowsil se 9160 adhesive, as a single component silicone adhesive, has mixed curing performance (UV curing and secondary wet curing), and can provide reliable waterproof and dustproof performance for PCB system components. It optimizes the dispensing process and provides controlled flow and repairability to help equipment manufacturers save costs. At the same time, the production and demand of adhesives also presents a diversified development trend. Henkel's loctite brand adhesive products can be applied to the assembly and assembly of robot body, servo motor and precision reducer, so as to improve the stability of robot operation and extend its service life. For example, for robot body assembly, locking adhesives such as loctite 243 and loctite 263 can effectively fill the gap between bolts and nuts, and the integrity of the structure can bring more reliable and stable locking performance.

Henkel loctite adhesive products are widely used in the industrial chain of industrial robots. As a professional high-end industrial adhesive supplier under the German haole group, panacol recently launched a new type of low-temperature rapid curing heat transfer adhesive, elecolit 6607, which has good mobility and can be very flexible through dispensing, silk screen printing, scraping and other ways Live sizing. The glue can cure rapidly at low temperature, which is specially developed for temperature sensitive applications such as electronic components and automobile industry. After curing, the glue has certain flexibility and high thermal conductivity, which perfectly solves the contradiction between high thermal conductivity and low viscosity of the thermal conductivity glue, and has a very good adhesion to metal and PCB. Also, Delo Monopox ge6515, a kind of packaging adhesive, which is not only resistant to medium but also resistant to high temperature, has been developed recently by Delo, as a one component, pure heat curing epoxy resin, this kind of packaging adhesive can maintain very high strength even under high temperature. At 150 ° C, its strength on aluminum is 20 MPa; at 200 ° C, its strength can still reach 14 MPa. At the same time, because the curing time has been optimized, the production efficiency has also been improved, which is especially suitable for the packaging of automotive electronic components. Why do Delo high temperature and medium resistant adhesive packaging applications on electronic components especially favor new adhesive connection? Because for the automotive industry, affected by multiple demands such as vehicle electrification, energy conservation and emission reduction, and performance improvement, lightweight has become the general trend and will continue to maintain high growth. Fule h.b.fuller's structural adhesive products can solve the bonding problems according to different materials, processes and demands. The lightweight structural bonding solutions recommended to the market solve the bonding requirements that the traditional welding, riveting and other connection methods cannot meet due to different working conditions and different shapes and structures of various parts of the car, fully reflecting the adhesive requirements Develop the trend of meeting diversified needs. Looking into the domestic market, the annual growth rate of high-performance and high-quality adhesives is more than 15%, higher than the overall growth rate of about 8%. A group of large enterprises in the forefront of the industry have strong scientific and technological R & D ability and economic strength, and the technical level is in the forefront of the industry. These enterprises are committed to developing high-performance environmental protection products, have strong competitive strength in the market competition, and obtain relatively rich profit returns.

Forecast of adhesive market scale in China from 2016 to 2021 (unit: 10000 tons) source: analysis report of adhesive industry of prospective industry research institute. In order to adapt to the development of "miniaturization" of electronic products, the amount of glue used in the electronic industry is becoming more and more miniaturized. The requirements for the positioning accuracy, fluid control and reliability of glue dispensing and injection are becoming more and more strict. In addition, the high-speed and automation of equipment is pursued to obtain the best spraying and adhesive effect. According to the data, in 2012, the market demand of dispensing machines in China was only 204000 (including full-automatic and semi-automatic), and by 2018, the market demand increased to 505000. China has become the main dispensing machine manufacturer in the world. Based on the production demand of precision processing, dispensing technology has been widely used in communication electronics, LED lighting, automobile, power supply, solar photovoltaic, industrial electrical and other industries. For example, in the field of new energy batteries, the overall solution of scheugenpplug new energy battery package filling and sealing is composed of high-performance glue injection head DOS HP and pailfeed200 abrasive material preparation system. Even when using high viscosity heat-conducting materials with high abrasiveness, the glue injection speed of up to 80ml / s can be achieved. The all-in-one solution is easier to operate and has high stability. Therefore, users can benefit from its simple and fast maintenance, long service life and low cost maintenance.

In addition, with the rapid development of 3C electronics, semiconductors and other industries in recent years, it has become a new round of growth engine in the dispensing market, providing a stage for the further upgrading of dispensing equipment. The requirements for fine and intelligent production are increasingly stringent. How to improve the equipment and technology has become the key factor for enterprises to win in the fierce market competition. For dispensing equipment, it means that only products with high speed, high precision and high reliability can be favored by downstream customers. Founded in 2008, axxon is the leading manufacturer of dispensing technology in China. In 2016, axis automation entered into a strategic cooperative joint venture with mycronic, the world's top SMT equipment manufacturer, to share powerful technology and complement the market, helping China to lead the world. Axxon high-precision spray dispensing overall solution Au series, aiming at the dispensing demand of SMT electronic manufacturing, specially introduces one-stop overall solutions such as automatic loading and unloading, precision spray dispensing, mark machine, AVI dispensing effect detection, glue heating and curing.

As a manufacturer of precision dispensing equipment and accessories, viscotec is especially good at the quantitative transportation of medium and high viscosity materials, specializing in the design and manufacture of process equipment and systems for the transportation, precise measurement, coating, filling and emptying of various viscosity fluid media Make. Viscotec's core competitiveness lies in the treatment of high viscosity, solid fillers, rough or shear sensitive liquids or pastes, which can provide a quantitative transportation scheme for all liquids with viscosity up to 7.000.000mpas, with almost no pulsation in the whole process and very low shear force. As a subsidiary of nexus, nexus EFD is also a first-class equipment manufacturer specializing in the design and production of precision dispensing equipment. Its multiple product lines can be matched with adhesives, sealants, lubricants and other component fluids used in every manufacturing process in the world Set use. For example, Pico P μ LSE non-contact spray valve can provide faster and more precise dispensing for smooth and uneven surfaces, resulting in less turbulence, so as to achieve better glue point stability, drop point consistency and process control. The micro glue point can be as small as 0.5nl, the continuous working frequency can be kept at 500Hz, and the maximum instantaneous frequency can reach 1500hz. However, at present, it is difficult for a single dispensing equipment manufacturer or material supplier to rely on their own strength to meet all the needs of customers, so equipment manufacturers and material suppliers need to work together to provide the most suitable overall solution for end users.