Cationic polyacrylamide 100%

Brief introduction: the product classification of polyacrylamide polyacrylamide polyacrylamide (PAM) is a water soluble polymer, insoluble in most organic solvents, has good flocculation sex, can reduce the friction resistance between liquid, by ion characteristic can be divided into nonionic, anionic, cationic and amphoteric four types. (Note: polyacrylamide is different from acrylamide.

Product use

1) used for sludge dewatering sludge according to the corresponding types of properties can choose this product, can be effective before the sludge into the filter press sludge dewatering, dehydration, floc, non stick cloth, filter without loose, the flow of mud cake thick, high dewatering efficiency, the cake moisture content below 80%.

2) for the treatment of domestic sewage and organic waste water, the products in the distribution or alkaline media are rendered positive, so the sewage suspended particles with negative charges of sewage flocculation and precipitation, clear very effective. Such as the production of grain alcohol wastewater, papermaking wastewater, waste water, city sewage treatment plant wastewater, monosodium glutamate wastewater, sugar wastewater, organic wastewater, high content of feed wastewater, textile printing and dyeing wastewater, with cationic polyacrylamide than with anionic, nonionic polyacrylamide or the effect of inorganic salts to several times or dozens of times, because this waste water is generally negative charge.

3) for the treatment of flocculant, with river water as the water tap water consumption, good effect, low cost, and especially the use of better composite inorganic flocculant, it will become a high efficient flocculant factory tap water to the Yangtze River, the Yellow River basin and other.

4) reinforcing agent for paper making and other auxiliaries. Improve the filler, pigment and other retention rate, the strength of the paper.

5) used in oilfield, such as clay anti swelling agent, oil field acidification thickener.

6) for textile sizing, sizing performancestability, fallspulp less, fabric breakage rate is low, clean cloth.

Package and storage: This product is non-toxic, pay attention to moisture, rain, avoid sun exposure. Storage period: 2 years, 25kg paper bag (lined with plastic bag outside the plastic kraft paper bag).

Polyacrylamide can be used in various sewage treatment (for the use of polyacrylamide is generally divided into two processes, sewage treatment is a polymer electrolyte and particle surface charge neutralization; two is the long chain and particle bridging polymer electrolyte to form flocs. The main purpose of flocculation is to form a larger group of fine particles and colloidal particles in the sludge by adding polyacrylamide. With the increase of the flocculation, the settling velocity increases gradually. Can the pressure mud through the filter press, and achieve environmental protection processing, dry mud Sinotrans incineration). PAM is the molecular weight of polymer by the millions to tens of millions of water soluble organic polymer, larger flocs were formed and huge surface adsorption resulting in particles. At present, the polyacrylamide representative polyacrylamide: nonionic polyacrylamide (NPAM, molecular weight of 800-1500 million), anionic polyacrylamide (APAM, molecular weight, cationic polyacrylamide (800-2000) - CPAM, molecular weight of 800-1200 million, 10%-80% ion). The dosage is generally a million to two of the amount of waste water. As a result, it is mainly formed by artificial synthesis.