metal machining liquid Industrial Grade

Product performance
1. High speed and efficiency.
The cutting efficiency is improved by 30% compared with traditional emulsified oil.
2. Good working environment.
No grease, clean machine, clean site, operator clothes without oil.
3. High finish.
Can improve the surface finish of the workpiece half - level.
4. Low silk consumption.
The loss of molybdenum wire is reduced by 30%.
5. Be green.
This product does not contain mineral oil, does not contain harmful to human body nitrite, waste liquid discharge up to the national level two discharge standards.
6, suitable for cutting thickness 0-500 mm, more than 300 mm cutting with pure water preparation better.

Notes
1. This product has excellent washing performance. After the workpiece is cut, please use magnet to absorb the workpiece to prevent the molybdenum wire from falling and breaking.

2. Cutting over 300mm workpiece, recommended parameters: pulse width 60-80, duty cycle 1:7-8, cutting current about 2.5a.
Variable frequency tracking adjustment slowly from zero until the ammeter is stable.
3. There is no mineral oil in the cutting fluid. When cleaning the bed surface by changing the liquid, circulate the water pump to make the bed surface clean better in the wet state.

Scope of application: all kinds of metal material wire cutting cooling processing.
It is also used for cutting and cooling of grinding machines, lathes, etc.