Product
Supplier
Encyclopedia
Inquiry
Home > Encyclopedia > Dimethyl sulfide

Dimethyl sulfide

Dimethyl sulfide structure

Dimethyl sulfide 

structure
  • CAS No:

    75-18-3

  • Formula:

    C2H6S

  • Chemical Name:

    Dimethyl sulfide

  • Synonyms:

    Methane,1,1′-thiobis-;Methyl sulfide;Methane,thiobis-;1,1′-Thiobis[methane];Dimethyl sulfide;DMS;2-Thiapropane;Dimethyl thioether;Methyl monosulfide;Dimethyl monosulfide;Dimethyl sulphide;Thiobis(methane);Methylthiomethane;Dimethylsulfane;(Methylsulfanyl)methane;956465-01-3

  • Categories:

    Cosmetic Ingredient  >  Perfuming

Description

Methyl sulfide has an intense, unpleasant odor, wild radish, cabbage-like. It can be tolerated as a green vegetable note only at very low levels (0.1 to 3.0 ppm Clear colorless liquid

Dimethyl sulfide Basic Attributes

62.13

62.13

200-846-2

2930909090

Characteristics

25.3

0.84

Dimethyl sulfide appears as a clear colorless to straw colored liquid with a disagreeable odor. Flash point less than 0°F. Less dense than water and slightly soluble in water. Vapors are heavier than air.

0.8483 g/cm3 @ Temp: 20 °C

-98.3 °C

37.3 °C

-36°F

n20/D 1.435(lit.)

Solubility in water: none

Before entering confined space where this chemical may be present, check to make sure that an explosive concentration does not exist.

Vapour pressure, kPa at 20°C: 53.2

Relative vapour density (air = 1): 2.1

LD50 orally in Rabbit: 535 mg/kg LD50 dermal Rabbit > 5000 mg/kg

Lower flammable limit: 2.2% by volume; Upper flammable limit: 19.7% by volume

vol% in air: 2.29.7

UNPLEASANT ODOR OF WILD RADISH, CABBAGE-LIKE

Characteristic flavor

Safety Information

II

3

UN 1164 3/PG 2

1

R11;R22;R36

S7-S9-S16-S29-S33-S36/39-S26

PV5075000

F:Flammable

Fireproof. Separated from strong oxidants. Cool.

Stable. Incompatible with strong oxidizing agents. Highly flammable - note low boiling point, low flash point, and wide explosion limits. Mixtures with air are potentially explosive. Incompatible with strong oxidizing agents. Use in UK regulated by LPG Regulations 1978 in accordance with HSE guidance note CS17.

P210-P305 + P351 + P338-P370 + P378-P403 + P235

H225-H319

Dimethyl sulfide Use and Manufacturing

Sulfiding agent.

Computed Properties

Molecular Weight:62.14
XLogP3:0.9
Hydrogen Bond Acceptor Count:1
Exact Mass:62.01902136
Monoisotopic Mass:62.01902136
Topological Polar Surface Area:25.3
Heavy Atom Count:3
Complexity:2.8
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes

Recommended Suppliers of Dimethyl sulfide

Scan the QR Code to Share

Complaint
Email:
Message:
Send Message