Rapid penetrant T-70

【 Chemical Composition 】 Sodium salt of dioctyl sulfonated succinate
【 Type 】 anion
Technical Indicators
Appearance: Colorless to light yellow viscous liquid
Penetration power: ≤5 seconds (1% aqueous solution, 25℃)
pH value: 5.0-7.0 (1% aqueous solution)
Performance and Application
1.It is highly soluble in water, and the solution is milky white. It is not resistant to strong acids, strong alkalis, heavy metal salts and reducing agents. It penetrates quickly and evenly and has good properties
Good wetting, penetrating, emulsifying and foaming properties. The penetration effect is best when the temperature is below 40℃. At high temperatures, it is more prone to hydrolysis when exposed to alkali. It is suitable to treat the fabric with a penetrant before heating it up at a temperature below 40℃. Penetrant T is not resistant to strong alkali and should not be directly added to concentrated alkali solution. The alkali solution should be diluted first before adding penetrant T.
2. This product is a highly efficient penetrant, used for treating cotton, linen, viscose and their blended products. The treated fabrics can be processed directly without scouring
Bleaching or dyeing can improve the dyeing defects caused by dead cotton, and the fabric after printing and dyeing feels softer and fuller. When the raw material is being blanched, it is best to remove the slurry completely first to ensure the penetration effect.
3.When using penetrant T, if too much foam is found, a small amount of defoamer such as GP or octanol, tributyl phosphate can be added to defoam.
4. For dyeing raw cotton; Used for wettable powder of pesticides.