3-Ethylamino-p-cresol
-
3-Ethylamino-p-cresol
structure -
-
CAS No:
120-37-6
-
Formula:
C9H13NO
-
Chemical Name:
3-Ethylamino-p-cresol
-
Synonyms:
Phenol,3-(ethylamino)-4-methyl-;p-Cresol,3-(ethylamino)-;3-(Ethylamino)-4-methylphenol;2-Ethylamino-4-hydroxytoluene;3-Ethylamino-4-cresol;1-Methyl-2-(ethylamino)-4-hydroxybenzene;2-Ethylamino-4-hydroxy-1-methylbenzene;3-Ethylamino-4-methylphenol;4-Methyl-3-ethylaminophenol;3-Ethylamino-p-cresol;N-Ethyl-5-hydroxy-2-methylaniline
- Categories:
-
CAS No:
Description
purple solidPurple solid.
3-ethylamino-4-methylphenol is a purple solid. (NTP, 1992)
3-ethylamino-4-methylphenol is a purple solid. (NTP, 1992)
3-Ethylamino-p-cresol Basic Attributes
151.209
151.21
204-391-0
8002QME89H
2512
DTXSID7025269
29222990
Characteristics
32.3
2.20540
3-ethylamino-4-methylphenol is a purple solid. (NTP, 1992)
1.0406 (rough estimate)
85-87 °C(lit.)
135-140°C 3mm
135-140°C/3mm
1.5380 (estimate)
less than 0.1 mg/mL at 64° F (NTP, 1992)
Keep in a cool, dry, dark location in a tightly sealed container or cylinder. Keep away from incompatible materials, ignition sources and untrained individuals. Secure and label area. Protect containers/cylinders from physical damage.
0.00704mmHg at 25°C
This compound may be sensitive to prolonged exposure to air. (NTP, 1992). Insoluble in water.
Amines, Phosphines, and Pyridines
An amine and phenol. Amines are chemical bases. They neutralize acids to form salts plus water. These acid-base reactions are exothermic. The amount of heat that is evolved per mole of amine in a neutralization is largely independent of the strength of the amine as a base. Amines may be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen is generated by amines in combination with strong reducing agents, such as hydrides. Phenols do not behave as organic alcohols, as one might guess from the presence of a hydroxyl (-OH) group in their structure. Instead, they react as weak organic acids. Phenols and cresols are much weaker as acids than common carboxylic acids (phenol has pKa = 9.88). These materials are incompatible with strong reducing substances such as hydrides, nitrides, alkali metals, and sulfides. Flammable gas (H2) is often generated, and the heat of the reaction may ignite the gas. Heat is also generated by the acid-base reaction between phenols and bases. Such heating may initiate polymerization of the organic compound. Phenols are sulfonated very readily (for example, by concentrated sulfuric acid at room temperature). The reactions generate heat. Phenols are also nitrated very rapidly, even by dilute nitric acid.
Safety Information
III
6.1
NONH for all modes of transport
2
R36/37/38
26-37/39
SL4105000
Xi
Stable. Incompatible with strong oxidizing agents.
P261-P305 + P351 + P338
H315-H319-H335
Flash point data for this chemical are not available. It is probably combustible. (NTP, 1992)
|Warning|H315 (100%): Causes skin irritation [Warning Skin corrosion/irritation]|P261, P264, P271, P280, P302+P352, P304+P340, P305+P351+P338, P312, P321, P332+P313, P337+P313, P362, P403+P233, P405, and P501|Aggregated GHS information provided by 44 companies from 3 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.
Fires involving this compound can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)
Excerpt from ERG Guide 152 [Substances - Toxic (Combustible)]: As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. SPILL: Increase, in the downwind direction, as necessary, the isolation distance shown above. FIRE: If tank, rail car or tank truck is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2016)
SMALL SPILLS AND LEAKAGE: Should a spill occur while you are handling this chemical, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with ethanol and transfer the dampened material to a suitable container. Use absorbent paper dampened with ethanol to pick up any remaining material. Seal the absorbent paper, and any of your clothes, which may be contaminated, in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned. STORAGE PRECAUTIONS: You should keep this material in a tightly closed container under an inert atmosphere, and store it at refrigerated temperatures. (NTP, 1992)
RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)
Drug Information
Excerpt from ERG Guide 152 [Substances - Toxic (Combustible)]: Highly toxic, may be fatal if inhaled, swallowed or absorbed through skin. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution. (ERG, 2016)
EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop. SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment. INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing. INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)
Computed Properties
Molecular Weight:151.21
XLogP3:2.3
Hydrogen Bond Donor Count:2
Hydrogen Bond Acceptor Count:2
Rotatable Bond Count:2
Exact Mass:151.099714038
Monoisotopic Mass:151.099714038
Topological Polar Surface Area:32.3
Heavy Atom Count:11
Complexity:116
Covalently-Bonded Unit Count:1
Compound Is Canonicalized:Yes
Recommended Suppliers of 3-Ethylamino-p-cresol
-
CN
5 YRS
Business licensedTrader Supplier of Intermediates,Building blocks,API,Silicones,Peptides,Lab chemicals,Biochemicals,Pharmaceuticals,Screening Compounds,Food Additives -
CN
5 YRS
Business licensed Certified factoryManufactory Supplier of fine chemicals,pharmaceutical materials -
CN
5 YRS
Business licensed Certified factoryManufactory Supplier of cosmetic additives,Veterinary APIs,Feed additives,medical and pharmaceutical packaging materials,pharmaceutical equipment,Natural Nutrition Ingredients,intermediates,Food Additives,Medical Devices,Human APIsInquiryCAS No.: 120-37-6Grade: Pharmaceutical Grade -
CN
3 YRS
Business licensed Certified factoryManufactory Supplier of Dyes,Textile agent,Medical intermediate,API,Pigments,Basic Chemicals
Learn More Other Chemicals
-
Methyl cellulose
9004-67-5
-
2-Pyridinylsulphide
4262-06-0
-
Oxirane, 2-methyl-, polymer with oxirane, ether with 1,2-propanediol (2:1)
53637-25-5
-
3,6,9,12,15-Pentaoxaheptacosan-1-ol Formula
3055-95-6
-
N-Vinylformamide Formula
13162-05-5
-
D-glycero-D-gulo-Heptonic acid, sodium salt, hydrate (1:1:2) Formula
10094-62-9
-
Dinonylnaphthalenedisulfonic acid Structure
60223-95-2
-
Phosphorodithioic acid, O,O-diethyl ester, sodium salt (1:1) Structure
3338-24-7
-
What is 1-[bromo-bis(4-fluorophenyl)methyl]-4-fluorobenzene
200004-38-2
-
What is acridin-9-ylmethanol
35426-11-0