Product
Supplier
Encyclopedia
Inquiry
Home > Pharmaceutical Intermediates > Bulk Drug Intermediates > Maleic anhydride for Sale > Maleic Anhydride 99% Industrial Grade Pharmacy Grade Colorless orthogonal acicular crystal or white crystalline powder
Maleic Anhydride 99% Industrial Grade Pharmacy Grade Colorless orthogonal acicular crystal or white crystalline powder buy - large image1
Maleic Anhydride 99% Industrial Grade Pharmacy Grade Colorless orthogonal acicular crystal or white crystalline powder buy - image1
Maleic Anhydride 99% Industrial Grade Pharmacy Grade Colorless orthogonal acicular crystal or white crystalline powder buy - image2
Maleic Anhydride 99% Industrial Grade Pharmacy Grade Colorless orthogonal acicular crystal or white crystalline powder buy - image3
Maleic Anhydride 99% Industrial Grade Pharmacy Grade Colorless orthogonal acicular crystal or white crystalline powder buy - image4
Maleic Anhydride 99% Industrial Grade Pharmacy Grade Colorless orthogonal acicular crystal or white crystalline powder buy - image5

Maleic Anhydride 99% Industrial Grade Pharmacy Grade Colorless orthogonal acicular crystal or white crystalline powder

215 Inquiries

Unit Price: Get Latest Price
CAS No.:

108-31-6

Grade:

Industrial Grade

Content:

99%

Port:

Port of Qingdao

Packaging:

25kg/bag 22MT/20fcl

Price valid (until):

2023-03-31

Company Type:
Trader
Location:
China
Qualification:
Main Products:

Melamine,ethyl acetate,maleic anhydride,acetic acid,tetrahydrofuran,butyl acetate

  • Product Description

  • Seller Information

  • Inquiry History

  • Description


      Maleic Anhydride  


    maleic anhydride , often referred to as maleic anhydride. Colorless crystal, strong irritating odor, freezing point 52.8℃, boiling point 202℃, easy to sublimate. It is mainly produced by the oxidation of n-butane or butene in benzene or C-4 fraction. It is the raw material for the production of unsaturated polyester and organic synthesis.

    Colorless orthogonal acicular crystal or white crystalline powder. Soluble in water, acetone, benzene, chloroform and other most organic solvents. Solubility (gllOOg) at 25℃ in the following solvents: acetone 227, ethyl acetate 112, chloroform 52.5 I benzene 50 I toluene 23.4; O-xylene 19.4; Carbon tetrachloride 0.60; Petroleum ether 0.25. Dissolve in alcohol to form esters. Dissolved in dioxane. Sublimation by heat. Risk of ignition in contact with high heat, open flame or oxidant. It is corrosive. It hydrolyzes slowly in cold water to produce maleic acid. Contact with strong oxidants can cause combustion and explosion. If the temperature exceeds 66℃, contact with amines or alkali metals will occur polymerization reaction.

    Reagent for the determination of organic compounds with conjugated double bonds. Also used in synthetic resins, coatings, pesticides, medicine, food, and lubricating oil additives.

    ItemsSpecifications
    English aliasMA
    2,5-FURANDIONE
    2,5-Furandione
    furan-2,5-dione
    MaleicAnhydride
    MALIEC ANHYDRIDE
    Maleic anhydride
    ANHYDRIDE MALEIC
    TOXILIC ANHYDRIDE
    Sodium n-amylxanthate
    cis-Butenedioic anhydride
    CAS108-31-6
    chemical formulaC4H2O3
    molecular weight98.06
    density1.48
    melting point51-56 °C (lit.)
    boiling point200 °C (lit.)
    flash(ing) point218°F
    water solubility79 g/100 mL (25 ºC)
    vapour pressure0.16 mm Hg ( 20 °C)
    vapor density3.4 (vs air)
    refractive index1.4688 (estimate)
    acidity coefficient0[at 20 ℃]
    PH value0.8 (550g/l, H2O, 20℃)Hydrolysis
    storage conditionStore below +30°C.
    stabilityStable. Combustible. Incompatible with water, strong oxidizing agents, alkali metals, strong bases, amines, most common metals, polymerization catalysts and accelerators.
    sensibilityMoisture Sensitive
    appearanceWhite powder
    colourWhite
    Explosion limit1.4-7.1%(V)
    physico-chemical propertyRhombic system colorless acicular or flake crystals. Dissolves in water to form maleic acid. Dissolve in ethanol and form esters.
    product useUsed for the production of 1, 4-butanediol, gamma-butanolactone, tetrahydrofuran, succinic acid, unsaturated polyester resin, alkyd resin and other raw materials, also used in medicine and pesticides.
    securityIts dust and vapors are irritating. The staff should be well protected and the working environment should be well ventilated. Should be stored separately from oxidant and alkali. Store in a cool, ventilated warehouse. Keep away from fire and heat. Keep out of direct sunlight. The package must be sealed and protected from moisture.
    risk codesHealth hazard: The dust and vapors are irritating. Inhalation can cause pharyngitis, laryngitis and bronchitis. May be accompanied by abdominal pain. Direct contact between eyes and skin is obviously irritating and can cause burns. Chronic effects: Chronic conjunctivitis, nasal mucosa ulcers and inflammation. It is allergenic and can cause rashes and asthma.

    Explosion hazard: The product is flammable, toxic, corrosive, irritating, can cause burns to human body, with sensitization.
    Operational disposal and storageOperation precautions: closed operation, local exhaust air. Operators must be specially trained and strictly abide by operating procedures. It is recommended that operators wear self-priming filter dust masks, chemical safety protective glasses, rubber acid and alkali resistant suits, and rubber acid and alkali resistant gloves. Keep away from fire, heat source, no smoking in the workplace. Use explosion-proof ventilation systems and equipment. Avoid producing dust. Avoid contact with oxidants, reducing agents and acids. When handling, light loading and unloading should be done to prevent damage to packaging and containers. Equipped with the corresponding variety and quantity of fire equipment and leakage emergency treatment equipment. An empty container may contain harmful residue.

    Storage precautions: Store in a cool, dry and well-ventilated warehouse. Keep away from fire and heat. Keep the container sealed. It should be stored separately from oxidants, reducing agents, acids and edible chemicals, and should not be mixed. Equipped with the corresponding variety and quantity of fire equipment. The storage area should be equipped with suitable materials to contain leaks.











    Basic Info
    Product Name:

    Maleic anhydride

    Other Name:

    2,5-Furandione;Maleic anhydride;cis-Butenedioic anhydride;Maleic acid anhydride;Toxilic anhydride;Dihydro-2,5-dioxofuran;BM 10;Nourymix MA 901;Crystal Man;Crystal Man AB;NSC 137651;NSC 137652;NSC 137653;NSC 9568;HG 3-993-76;M 188;2,5-Dihydrofuran-2,5-dione;SY-A;WS 8201;GR 216;A 1018;Baolilong A 1018;HA 59;184288-31-1;1190407-73-8;1229972-04-6;1380217-40-2

    CAS No.:

    108-31-6

    UN No.:

    2215

    Molecular Formula:

    C4H2O3

    InChIKeys:

    InChIKey=FPYJFEHAWHCUMM-UHFFFAOYSA-N

    Molecular Weight:

    98.05688

    Exact Mass:

    98.06

    BRN:

    106909

    EC Number:

    203-571-6

    HScode:

    2917140000

    Characteristics
    PSA:

    43.37000

    XLogP3:

    -0.37

    Appearance:

    White powder

    Density:

    1.48 g/cm3

    Melting Point:

    52.8 °C

    Boiling Point:

    202.0 °C @ Press: 760 Torr

    Flash Point:

    218 °F

    Refractive Index:

    1.515

    Water Solubility:

    H2O: 79 g/100 mL (25 ºC)

    Storage Conditions:

    Store at RT.

    Vapor Pressure:

    0.16 mm Hg ( 20 °C)

    Vapor Density:

    3.4 (vs air)

    Toxicity:

    Oral-rat LD50: 708 mg/kg; Oral-Mouse LD50: 2400 mg/kg

    Flammability characteristics:

    Flammable; spicy and irritating smoke is released from the fire

    Explosive limit:

    1.4-7.1%(V)

    Odor:

    Pungent odor

    PH:

    pH of water solutions: 2.42 at 1X10-2 M; 2.62 at 5X10-3 M; 3.10 at 1X10-4 M

    Hazard Identification

    Classification of the substance or mixture

    Acute toxicity - Category 4, Oral

    Skin corrosion, Sub-category 1B

    Serious eye damage, Category 1

    Skin sensitization, Sub-category 1A

    Respiratory sensitization, Category 1

    Specific target organ toxicity – repeated exposure, Category 1

    GHS label elements, including precautionary statements

    Pictogram(s)
    Signal word

    Danger

    Hazard statement(s)

    H302 Harmful if swallowed

    H314 Causes severe skin burns and eye damage

    H317 May cause an allergic skin reaction

    H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled

    H372 Causes damage to organs through prolonged or repeated exposure

    Precautionary statement(s)
    Prevention

    P264 Wash ... thoroughly after handling.

    P270 Do not eat, drink or smoke when using this product.

    P260 Do not breathe dust/fume/gas/mist/vapours/spray.

    P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...

    P261 Avoid breathing dust/fume/gas/mist/vapours/spray.

    P272 Contaminated work clothing should not be allowed out of the workplace.

    P284 [In case of inadequate ventilation] wear respiratory protection.

    Response

    P301+P317 IF SWALLOWED: Get medical help.

    P330 Rinse mouth.

    P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.

    P363 Wash contaminated clothing before reuse.

    P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.

    P316 Get emergency medical help immediately.

    P321 Specific treatment (see ... on this label).

    P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

    P305+P354+P338 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

    P317 Get medical help.

    P302+P352 IF ON SKIN: Wash with plenty of water/...

    P333+P317 If skin irritation or rash occurs: Get medical help.

    P362+P364 Take off contaminated clothing and wash it before reuse.

    P342+P316 If experiencing respiratory symptoms: Get emergency medical help immediately.

    P319 Get medical help if you feel unwell.

    Storage

    P405 Store locked up.

    Disposal

    P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.

    Other hazards which do not result in classification

    no data available

    Handling and Storage

    Precautions for safe handling

    NO open flames. Closed system, dust explosion-proof electrical equipment and lighting. Prevent deposition of dust. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.

    Conditions for safe storage, including any incompatibilities

    Dry. Separated from strong oxidants, strong bases and food and feedstuffs.Keep container tightly closed in a dry and well-ventilated place. Moisture sensitive. Storage class (TRGS 510): Non-combustible, corrosive hazardous materials

  • Seller Information
    Business Type:

    Trader

    Main Products:

    Melamine,ethyl acetate,maleic anhydride,acetic acid,tetrahydrofuran,butyl acetate

    Location:

    Room 21-1, 14th floor, Zone (A), Guangrao City Commercial Complex, Quanfu Yuan, Guangrao County, Dongying City, Shandong Province

    Payment Terms:

    TT against copy of documents,L/C

    Average lead Time:

    20

    Total Annual Revenue:

    $50 million-$100 million

    Total Employees:

    51-100

    Year of Establishment:

    2018

    Shandong Lingnuo chemical Co.,Ltd is located in Dongying City, Shandong Province, export more than ten years It is mainly exported to Africa, Asia,Middle East,South America , mainly delaing with product tetrahydrofuran, Melamine, Methylene chloride, aniline oil, Dimethyl Formamide,Acetic acid, Isopropyl Alcohol, Maleic anhydride,Methyl Acetate,DMSO, Ethanol and so on.

  • Inquiry History
    215 Inquiries
    Country Product Purchase Quantity Date Posted
    Japan

    Inquiry for Maleic Anhydride (Biobased) – CAS No. 108-31-6

    1 20' Fcl Jan 23, 2026
    India

    Maleic Anhydride 108-31-6

    250 MT Oct 27, 2023
    United States

    Maleic Anhydride (molten) 99.6% CAS 108-31-6 YUSSEN

    6000 MT Sep 21, 2023
    Egypt

    maleic anhydride bulk 99% white powder CAS 108-31-6 C4H2O3 maleic anhydride

    25 MT Nov 1, 2023
    Colombia

    Maleic Anhydride

    1 KG Aug 26, 2025
    United States

    Maleic anhydride

    100 TON Jun 14, 2024
    India

    Maleic Anhydride (Molten)  

    200.00 KG Jun 1, 2025
    India

    Maleic Anhydride (Molten) 

    20.00 KG May 20, 2025
    India

    Maleic Anhydride (Molten) 

    10.00 KG May 17, 2025
    India

    Maleic Anhydride (Molten) 

    30.00 KG May 22, 2025
    India

    Maleic Anhydride

    20.00 MT Feb 18, 2024
    Pakistan

    Maleic Anhydride

    1.00 MT Jul 30, 2024
    Turkey

    Maleic anhydride

    100 MT Jul 5, 2023
    India

    Maleic Anhydride

    20.00 MT Feb 21, 2024
    United Kingdom

    Maleic Anhydride

    1.00 MT Nov 6, 2024
    Austria

    Maleic Anhydride (Molten)

    100.00 KG Jun 7, 2025
    India

    Maleic Anhydride

    1.00 MT Feb 26, 2024
    India

    Maleic Anhydride

    15.00 MT Jan 31, 2024
    Qatar

    Maleic Anhydride

    40.00 TON May 23, 2024
    Malaysia

    MALEIC ANHYDRIDE

    300 MT Jan 29, 2025
    Post an enquiry for this product
pic ×

Scan the QR Code to Share

All products displayed on this website are only for non-medical purposes such as industrial applications or scientific research, and cannot be used for clinical diagnosis or treatment of humans or animals. They are not medicinal or edible.

According to relevant laws and regulations and the regulations of this website, units or individuals who purchase hazardous materials should obtain valid qualifications and qualification conditions.

The information shown above is provided by the enterprise itself, and the authenticity, accuracy and legitimacy of the content are the responsibility of the publishing company. ECHEMI does not bear any guarantee responsibility for this. Please be aware that risks in internet transactions objectively exist.

Feedback & Suggestions
Send Message

Thank you for your feedback. If you require further assistance, please contact us by email at info@echemi.com or call us at +86-532-55729510.