Sebacic acid 99% White powder

Sebacic acid

Decanedioic acid;Sebacic acid;1,8-Octanedicarboxylic acid;1,10-Decanedioic acid;n-Decanedioic acid;NSC 19492;NSC 97405

111-20-6

C10H18O4

InChIKey=CXMXRPHRNRROMY-UHFFFAOYSA-N

202.24800

202.25

203-845-5

97AN39ICTC

1685

19492

DTXSID7026867

2917131000

Bulk Drug Intermediates

74.60000

2.1

White powder

1.231 g/cm³

130.8 °C

294.5 °C

220 °C

1.422

Solubility in water, g/100ml: 0.1 (poor)

Storage Room low temperature ventilation drying

1.24E-06mmHg at 25°C

141.9 Ų [M-H]- [CCS Type: DT, Method: single field calibrated with Agilent tune mix (Agilent)]|152.7 Ų [M+Na]+ [CCS Type: DT, Method: single field calibrated with ESI Low Concentration Tuning Mix (Agilent)]|144 Ų [M-H]- [CCS Type: DT, Method: single field calibrated with ESI Low Concentration Tuning Mix (Agilent)]|146 Ų [M+Na-2H]- [CCS Type: DT, Method: single field calibrated with ESI Low Concentration Tuning Mix (Agilent)]|146.3 Ų [M-2H+Na]-

Insoluble in water.

Acids, Carboxylic

SEBACIC ACID reacts exothermically to neutralize bases, both organic and inorganic. May react rapidly with aqueous solutions containing a chemical base and dissolve as the neutralization generates a soluble salt. Can react with active metals to form gaseous hydrogen and a metal salt. Such reactions are slow in the dry, but systems may absorb enough water from the air to allow corrosion of iron, steel, and aluminum parts and containers. Reacts slowly with cyanide salts to generate gaseous hydrogen cyanide. Reacts with solutions of cyanides to cause the release of gaseous hydrogen cyanide. May generate flammable and/or toxic gases and heat with diazo compounds, dithiocarbamates, isocyanates, mercaptans, nitrides, and sulfides. May react with sulfites, nitrites, thiosulfates (to give H2S and SO3), dithionites (SO2), to generate flammable and/or toxic gases and heat. Can be oxidized exothermically by strong oxidizing agents and reduced by strong reducing agents. May initiate polymerization reactions.

Dust explosion possible if in powder or granular form, mixed with air. If dry, it can be charged electrostatically by swirling, pneumatic transport, pouring, etc.